anti wobble shims KP5L's z-axis
Description
anti wobble shims KP5L's z-axis top mounts' barrings. if your Z-screw wobbles forward and back. print these; one per side remove the mounts by unbolting the 2 forward-facing mount bolts, (not top brace) lift up, flip over, and unscrew the 3 little screws, and now you have access to the barring. I recommend raising your x-axis to maximum height without these mounts installed and gauge where your best center is for your barring. once found position your shims. lower your z-axis, and reinstall your mounts. i found I still had little play, mostly on the driver side which originally had most of the issue. i may need to replace these cheap barring, but this resolved my minor wobble issues
Statistics
Likes
0
Downloads
0