upgrade parts for the KP3S Pro
Description
upgrade parts for the KP3S Pro (S1+V2) the y-axis part is needed if you upgrade the y-axis on the KP3S Pro S1 with linear guides. this kit costs 35$ and i recommend to do it. best to do it on the Kingroon site directly: https://kingroon.com/products/y-axis-linear-guide-upgrade-for-kingroon-kp3s-pro after the upgrading the end switch didn't fit. therefore the small adapter. additionally 2 screws M2.5x6mm are needed. with this block fits both: the distance (end position y-axis) and the switch flag to the screw of the bed. the second component (guide) is for S1 & V2. it holds the hose above the filament sensor. the guide remains constant and the filament does not break at this point. simply push the block over the hole. if the filament sensor does not sit exactly under the hole in the sheet metal, then simply bend the sheet metal slightly forward or backward on the inside. 3. component is an alignment aid when the linear axes of the y-axis are placed and screwed on (see video from kingroon: https://youtu.be/8f4uOHlxcGI). https://youtu.be/tjVy891SuPk
Statistics
Likes
0
Downloads
0