Travel Mini-Stratego game
Description
As a boy (a loooong time ago) I spent hours playing the Stratego game. Here is now my “Travel”-version. The board is, because of size, reduced to 8 X 8 fields. This is the “mini” version. There are now also only 24 game pieces. The rules you can find here: https://en.wikipedia.org/wiki/Stratego or here: https://www.officialgamerules.org/stratego Because of size and visibility I had to select different images for the pieces. Below you find a comparison and available ranks. On each game piece I also embossed the rank nr. (visible only when you lift the piece from the board) Instructions You can print the Bottom with 0.2 mm layer. There are 2 color changes, blue for the lakes and black for the grid. Use a piece of filament for the hinge. You probably have to ream the holes a bit with a 1.8 mm drill. Print the lid also with 0.2 mm layer. Print the latch with 0.1 mm layer. Glue the latch to the lid. The game pieces with 0.1 mm layer and a color change. Of course you have to print 2 sets of pieces with different colours. If you have a smaller 0.25 mm nozzle please try to print the game pieces with that size and let me know the results (I am planning to buy a 0.25 nozzle) When you print my design, please share it.
Statistics
Likes
0
Downloads
0