Thrustmaster Playseat Challenge T.16000M HOTAS mounts
Description
Hi all, this is my first project, I'm absolutely a noob, I don't own yet a 3D printer nor I know how to 3D design stuff. I only have a problem to solve: I have a playseat challenge, a Thrustmaster T.16000 joystick and throttle and the desire to find a nice solution to keep things tidy. Kindly let me know the obvious things I have not made properly. I have seen the great ["HOTAS mount for Playseat Challenge"](https://www.thingiverse.com/thing:2865739 "HOTAS mount for Playseat Challenge") project but I did not want to have to use a wooden plate to hold my HOTAS setup. I have also seen the nice ["Thrustmaster T.16000M VESA Mount Plate"](https://www.thingiverse.com/thing:2769281 "Thrustmaster T.16000M VESA Mount Plate") project but this did not fit the current idea I have, that is to use the "HOTAS mount for Playseat Challenge" setup. *Project evolution:* I took the "VESA_Mount_Plate_for_Flight_Stick" and "VESA_Mount_Plate_for_Throttle" and: 1) removed the center square holes 2) increased thickness to 4mm to match the "hotas_plate_mount" thickness 3) I opened the "hotas_plate_mount" and removed the unneeded screws holes, leaving only the M6 mounting one 4) I joined the new hotas_plate_mount and the two VESA mounts *Notes:* I have designed these two mounts with the joystick on the right side and the throttle on the left side. I'm not sure if they can be swapped. *Instructions:* Print all files in project ["HOTAS mount for Playseat Challenge"](https://www.thingiverse.com/thing:2865739 "HOTAS mount for Playseat Challenge") apart from the two "hotas_plate_mount". Instead of those two, print mine. You will need two M6 screws for the joystick and two M6 screws for the throttle.
Statistics
Likes
0
Downloads
0