Double sphere tower

Description

I Made It To Learn How To Print Sphere-Like Object And Test The Layer Fan. Without Layer Fan Even 3 Mm/S Printing Speed Might Produce Sag At The Lower Bottom Of Sphere. The Printing Speed Was 60 Mm/S During The Session. Pronterface Log The Print Goes: - From -18.21 Mm To 17.80 Mm In X And Is 36.01 Mm Wide - From -17.76 Mm To 17.76 Mm In Y And Is 35.52 Mm Deep - From 0.00 Mm To 48.41 Mm In Z And Is 48.41 Mm High Estimated Duration: 194 Layers, 0:36:09 Setting Print Speed Factor To 5%. Setting Print Speed Factor To 15%. Setting Print Speed Factor To 20%. Setting Print Speed Factor To 25%. Setting Print Speed Factor To 30%. Setting Print Speed Factor To 25%. Setting Print Speed Factor To 20%. Setting Print Speed Factor To 15%. Setting Print Speed Factor To 30%. Setting Print Speed Factor To 25%. Setting Print Speed Factor To 20%. Setting Print Speed Factor To 15%. Setting Print Speed Factor To 20%. Setting Print Speed Factor To 15%. Setting Print Speed Factor To 10%. Setting Print Speed Factor To 15%. Setting Print Speed Factor To 20%. Print Ended At: 00:35:56 And Took 2:16:17

Statistics

Category

Tags