Kratky Hydroponics (Collection)
Description
A lot of this is built around a 18 x 48" Wire Rack (Specifically Trinity from Costco) 003D0014P022_B.stl - 2 x 3" Vinyl Downspout End Caps (No Drain Hole) 003D0014P023_F.stl - 3 x 4" Vinyl Downspout End Caps (With Drain Hole) 003D0014P200_C-Left.stl - 2 x 3" Downspout Bracket (Left) 003D0014P200_C-Right.stl - 2 x 3" Downspout Bracket (Right) 003D0014P120_E.stl - 10 x 10cm Grow Tray (4 x 4") 003D0014P122_B.stl - Drip Tray for 10 x 10 cm Grow Tray (11 x 11 x 2 cm, 4.3 x 4,3 x 0.75") 003D0014P121_D.stl - Flat Pressure Cover for 10 x 10 cm Grow Tray 003D0014P123_C-2cm.stl - Humidity Cover for 10 x 10 cm Grow Tray (2 cm High, 0.75" High) 003D0014P123_C-4cm.stl - Humidity Cover for 10 x 10 cm Grow Tray (4 cm High, 1.5" High) 003D0014P024_C - 2x3 2" Hole Template for 17" Long Module (for 18" Wire Racks) All parts generally in Metric (it's easier to think than Imperial, and I think a lot of Imperial Parts are really Metric anyway, even if they say 1/4", etc) Clear PETG for Humidity Cover, I used PLA for the rest (but PETG would be better) and GE All Purpose Silicone to seal. I liked the Matte Finish for the end-caps. This will be a growing collection. I use Revisions to indicate changes, so this will likely be a living post. I left the hole about 2/3 the way up the 3x4" because I am going to use them outside and that will limit my ability to overfill. I'll add more caps with and w/o holes. To drill holes in the Vinyl Downspout (2x3" from Home Depot, 4x3" from Lowes, at least locally for me), use a hole saw running backwards or a diamond/tile saw, but it makes more dust than the hole saw.
Statistics
Likes
0
Downloads
2