Fitting Net Pot for Net pot holder
Description
<p>This is an adapter for amazing <a href="https://www.thingiverse.com/thing:3405964"> Modular Hydroponic Tower Garden by boundarycondition</a>. it works perfectly with <a href="https://www.thingiverse.com/thing:5425383"> Minimal 2" Net pot holder by sethmo</a>.</p> the net pot snaps into the pot holder and stays where it should be. Also during watering or if the plant getting heavier. it stands also on the table with its flat bottom, if you want to use your net pot for seeding. it just needs 13g of material and if you use a cheap filament, it is almost same price as a 2''/5cm net pot on amazon. walls are 1.24mm. i'm using a 0.6 nozzle with 0.62 line width. if you need different width or if you have problems, just give me a hint. i recommend to print in PLA or PETG. or the cheapest filament you find. as the net pot could be done after a planting period if the roots will exhaust it.
Statistics
Likes
0
Downloads
0