Travel Sliding Tiles Puzzle
Description
I took the idea of the "sliding tile puzzle" expanded it to 6 X 6, instead of the most seen 4 X4 version, and adapted it to my “Travel-Game” format. The history of this type of puzzle you can find in Wikipedia: https://en.wikipedia.org/wiki/Sliding_puzzle All my “Travel Games” have the same size, can be easily put in a backpack and do not need batteries. They are designed so that you can play them in a moving vehicle, like car, train or plane. Instructions The main part prints in place with 0.2 mm layer height. You need a well aligned and tuned printer. The tolerances are 0.3 mm between moving parts. Maybe you have to “work free” the parts with a knife or by forcefully moving them. I changed color 2 times (White for the frame, yellow for the tiles and black for the figure). The “lower” part must be glued on the main part. I created some holes where you can put in 1.75 mm filament pieces, approx 3 mm long, to guide the alignment. Be careful not to spill glue between the moving parts. The hinge is also made of pieces of filament. Likely you have to ream all the 1.8 mm holes with a 1.8 mm drill. Also the hinges need probably some sanding for smooth operation. Print the latch with 0.1 mm layer, and glue it on the lid. If you don't do this it will come off after time. And.. Have fun, and do not forget to give feedback and post the results when you have printed it. The feedback is my reward…
Statistics
Likes
0
Downloads
0