Gear Loot Chest
Description
Cool little decorative geared chest for storing your most precious loot.  **Printing** No supports needed. Print the lid pieces the geared faces down. **Assembly** You need 4 M3x14 bolts and nuts for the lid hinges if you use the knobs. If you leave the knobs out, M3x12 should be long enough. Glue the lid halves together using the pins, put some glue on the knobs and screw them in the hinge holes. There are holes on the inside to hold the nuts. If you don't like the knobs for opening the lid, you can leave them out. You can still easily open the chest pulling from the sides.
Statistics
Likes
2
Downloads
5