Veteran Sherman tail light
Description
Broke my tail light and decided to upgrade! bought the leds from amazon and removed the birds nest of wires that they come with. See photo of how I rewired them. Take note to wire D1 into D0, do not bridge these. The included controller works well enough, but this design does not allow for easy changing of the set light pattern. Might be worth upgrading to a bluetooth controlled light controller. I used the removed connectors from the led rings to whip up a split tail for the jack on the EUC that the tail light was previously plugged into. one for the tail light, one for the side led strips. Hardware is M6, same as the screws that are on the stock light. Nut fit is tight, but works fine with a soldering iron. Needs 4 sets in total. Last thing is to cut a sheet of 2mm plexiglass 112mm diameter or print one with transparent filament. This just gets siliconed in place with clear silicone or caulk as I was too lazy to make a fancy snap clasp. Feel free to remix if you so desire. WESIRI 93 LEDs 6 Rings WS2812B 5050 RGB LED Ring Lamp Light Individually Addressable Full Dream Color DC5V with Mini Controller https://www.amazon.com/gp/product/B083W44B8N/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Statistics
Likes
0
Downloads
0