Falcon F16v4 Expansion Board Mount
Description
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350. This will hold 2 PSUs and removes the need for an extra mount setup for stacking the PSU's The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Mounting Hardware: 4x - M4 - 8mm bolts (secure mount to PSU) 4x - M3 - 12mm bolts/nuts (secure controller to mount) F16v4 Expansion - https://pixelcontroller.com/store/short-range-expansion/74-f16v4-expansion-board.html MW LRS 350 - https://www.amazon.com/LRS-350-24-Enclosed-Switching-Replacement-Termina MW LRS 600 - https://www.digikey.com/en/products/detail/mean-well-usa-inc/LRS-600-27/16394232
Statistics
Likes
0
Downloads
1