Vixen dovetail camera adapter
Description
I designed this adapter in order to place my Canon 600D on a Sky-watcher HEQ5 mount by using a dovetail vixen-style bar. The two screws connecting the bar to the adapter are the classical non metric 1/4" 20tpi 3/4" long and are 3cm apart. I had longer screws so I put some more washers. I had also some camera tripod screws left so I designed the knob and I used one of them. You can use a knob from a tripod instead. The little screw upside down in the photos is an M3 12mm long screw which goes inside a screw hole on my Canon and prevents the camera from tilting issues during the exposures. It is completely unnecessary for light lenses.
Statistics
Likes
0
Downloads
0