Xootr Strap Clasps
Description
I've had a Xootr Cruz kick scooter for years, but haven't used it much in years. Lately I've be kicking around on it, so I decided to make a few things that it was missing. I made a kickstand for it, so now I've made a couple of simple clasps so that I can attached a shoulder strap, making it a bit easier to tote around when I've got other things to carry. Xootr sells, a strap and clases for $15, but I only need the clasps. So, I designed some. They are simple. There is the small clasp, which clips onto the neck of the handlebars, at the top. Secure it using an m3 screw and nut 20mm. Then there is the larger clasp Front, which gets threaded and clipped into the space, between the wheel pivot. Clip it to the base of the tear shaped cylinder. Lock it in place using the Clasp Back and m3 screws (20mm) and nuts. Use m3 screws (20 to 25mm) and nuts to secure the clasps in place, and then clip a nice strap to each. Just like the one the Xootr sells, the strap can stay in place when the bars are extended.
Statistics
Likes
0
Downloads
0