Poop Collector/Catcher/Slider/Purge for Bambu Lab Printers
Description
POOP CATCHER DELUXE After a long period of searching, I decided to create the best-looking and most useful poop catcher for the Bambu Lab printers by merging some of the ideas I found online. I wanted something with a good design that integrates seamlessly with the printer's design; I wanted it to be in two pieces to leave the slide always connected to the printer to never miss a poopshot and easily empty the basket; It needs to stay always in place, also when the printer vibrates the most, so I added a slot for some 3M VHB tape to the slide and a magnet to keep the basket always in its place. HOW TO PRINT I suggest using the settings I put on the file for the best results. I uploaded 2 versions of the file, one with the magnet and the other a bit different but without the magnet If you print the magnet version you have 2 options: you can pause the printing at layer 26, then wait a bit for cooling and carefully break the supports in the magnet slot, put the magnet (maximum dimensions 20x3mm) in it place, then you can restart printing and the printer must print the upper layer on top of the magnet blocking it in place (I suggest to pause the printing during the inner part so you don't ruin the outer shell); if you are not confident to pause the printer you can also at printing fully completed cut with an hot thing the slot for the magnet to insert it In the back of the basket, there are 5 slots to insert something that is attracted by the magnet on the slide such as bolts or other magnets FOR THE BEST RESULTS PRINT ONLY AT NORMAL OR SILENT SPEED IF YOU ARE USING A BAMBU LAB PRINTER By CotoMaker
Statistics
Likes
0
Downloads
0