Ring doorbell 2nd generation - Mount 45°
Description
An integer mount for the ring doorbell that can secure the doorbell with a lock. REQUIRED HARDWARE: - 2 screws/plugs for attaching the mount to the wall. - 4 x M4 thread inserts. - A soldering iron. - 4 x M4 bolts (L < 10mm) with countersunk head. - The original screwdriver and fixing screws that are supplied with the doorbell. - A padlock. IMPORTANT NOTES - This mount only fits the Ring doorbell 1 - 2nd generation. - When securing the doorbell on the backplate, only use the original small screws to prevent protruding the battery by accident. INSTRUCTIONS 1) Use a soldering iron to press the M4 thread inserts into the mount. 2) Attach the mount to your wall with 2 screws 3) Secure the backplate of the doorbell to the mount with the M4 bolts with countersunk head. 4) Attach the doorbell to the backplate and secure it with the 2 original fixing screws. Use the original screw driver. 5) Place the locking plate between the fixing screws and bottom of the mount. 6) Lock the locking plate with a padlock or combination lock.
Statistics
Likes
0
Downloads
0