Belt hook and handles for Flysky Paladin 18 ev
Description
Belt hook: I have created this piece that slides on to the bottom of the flysky paladin 18 ev. it is a pretty tight fit, sorry for that, it reqires a little bit of sanding. Print standing upright, its 15 centimeters and therefor fits a smaller printer like the Prusa mini. i had 15% infill and support. it took about 9h to print. The holes on the side are for a future update, they are for inserting a brass m5 insert (holes are 6,8mm) Handles: the handles i did as an experiment to learn organic forms in fusion 360. they work great with just a minimum of push down on the Paladin ev gimbals. they make the rotation feature of the paladin sticks work so much better/easier. test them out, however, if you want to make your own design you can do so, i have tested out the measurements for the gimbals and if you make the hole for the handles, witch are conical as following measurements they should work out fine. bottom hole: 28,6mm top hole: 25,3mm height between them(loft function): 24mm
Statistics
Likes
0
Downloads
0