Corny keg scale (Plaato)
Description
Not as much of a remix as it is a re-design. I do thank @misperry for his insightful video and STLs he shared here. I redesigned this scale to fit the build plate of the Ender 3. You do have to edit your slicer settings to tell it your build plate is 235x235 (the whole plate) as this will take up the entire surface. I borrowed @patrick3345 50kg loadcell brackets, took the mounting holes off, and modified the retention ring a bit so they would clamp the loadcell down and leave a wire chase. The screw bosses can be tapped with a 4mx0.7 tap or a coarse thread screw (no tapping). I put the screw bosses next to the loadcell mounts to leave plenty of room for the circuit boards. I also modified misperry's feet a bit as when I printed them on the ender, the post was a hair high and the flair at the bottom prevented it from seating all the way in. Probably a machine thing, but I chamfered the rims for an easy fit. I omitted a hole for the power port and LED lights as these can vary a great deal. Shouldn't be too hard to drill a hole. Truth be told, I have not printed this in its entirety myself. I'm pretty sure everything should fit together and will update as soon as I test print and assemble the parts.
Statistics
Likes
0
Downloads
0