Hammer Table Saw 50x60 Fence Extrusion End Piece
Description
End pieces to fit the 50 wide x 60 high extrusion used for the fence on my Hammer table saw (and I'm sure many others). Left end is plain, right end has an extension so it goes under the guard on top of the blade. One wedge piece required per end. It needs a M6 x 50 Socket Bolt, nut and washer for each end. This pulls the expanding wedge in and locks the end piece into the extrusion. I copied this mechanism from a bicycle steering stem. Print right end piece in normal orientation with supports. Left end can be flipped so end face is down to minimise support. Normal print settings, this is not a highly stressed piece.
Statistics
Likes
0
Downloads
0