Festool TS55 dust port fix
Description
Simple printed part to stop the dust extraction port on the Festool TS55 from spinning freely. Lets you position the extraction hose where you want it and it stays there. The part is small so print it with as much accuracy as you can. The part clips in under the moulded ratchet springs in the Festool connector. They are a nice click fit on my saw but if they are too loose on yours a dab of glue might be needed. You can simply pull them back out to restore the original rotation. Loosen the bayonet connector from the saw to reposition the hose angle.
Statistics
Likes
0
Downloads
0