Modular Control Board Box (Example: BTT Manta M5P)
Description
This is a modular case for the Bigtreetech Manta M5P. It can be easily adapted to any other control board with a size smaller or equal to 145x105mm via modifying the two holding brackets "MantaHolderBoxOben" and "MantaHolderBoxUnten". It has cable outlets on the top, left and right side. It mounts to a 40 mm high standard extrusion using M3 screws and T-nuts. In my case, this is a heavily modified dual printhead Ender-3pro with Klipper. Cooling is taken care of by two 40mm fans and adequate cooling openings in the box. Additionally, acrylic sheets can be applied to allow for some view at the control box. It is possible, to change the acrylic sheets on the sides for further cooling panels if cooling is still not sufficient. Additionally Required: - Self Tapping Screws 2 x 6mm - Various M3 screws - 4 M3 T-Nuts for mounting to extrusion - 8 M3 threaded inserts, outer diameter 4mm - Some spare 3mm acrylic glass sheets - 2 40mm fans (example: Noctua 40x10 fans)
Statistics
Likes
0
Downloads
0