Camera Housing for OV3660 30 x 25 x 14mm
Description
Small Housing for USB Camera module OV3660 USB Module: L: 30mm W: 25mm H: 14mm I used the Pins instead of the Socket the kable is meant to be under the Cam to the hole. Small holes for the Lid made for threaded insert M3 from CNC Kitchen Big holes for Mounting made for threaded insert M5 from CNC Kitchen If you use Springs between inserts and screws you can adjust the Camera Tilt ;-) 1. Unscrew the Lens carefully 2. put the cable through the hole 3. Solder it to the Pinholes 4. carefully push the module down (pinholes on the opposite of the Cablehole) Only this way the module will fit properly 5. Put the Lid on and screw it thigt (Shouldnt bent. It should fit exaktly without glue) 6. Screw the lens back on (connect to Pc and adjust lens sharpness)
Statistics
Likes
0
Downloads
0