Raspbery pi 4 with POE Hat case
Description
This is a minimal-sized case designed for Raspberry Pi 4 Model B with POE Hat, suitable for 3D printing using ABS+ plastic. I recommend using a layer thickness of 0.1mm for optimal results, but I was able to print it quickly using a 0.3mm layer thickness. It took me about 1 hour and 40 minutes to print both parts of the case. I have attached a photo of the case that resulted from my quick print. The Raspberry Pi board fits snugly inside the case, and I used the original POE Hat fastening screws for attachment. However, I had to widen the screw holes using a drill before mounting it. I also included two options for the bottom part of the case - one with my personal logo and the other with the standard Raspberry Pi logo. Users can choose which one to print based on their preference. Both logo options have been designed to ensure proper ventilation.
Statistics
Likes
0
Downloads
0