wild birds feeder
Description
wild birds feeding column for hanging. The following is still required: Plexiglass tube 80/74mm melting thread 2ea M6, 4ea M4 ring screw M6, washer M6, M4 and M6 screws Silicone glue or plastic glue to glue adapters 1 and 2 to the Plexiglas tube. I printed with 0.6mm Nozzel and 0.3mm layer, in PLA+, the seals in TPU. The filling funnel is a useful aid. Adapter 2 belongs on top of the tube and is screwed into the cover with the 4 bars. The roof is pushed onto the body, before printing the roof you should measure the gap between the body and adapter 1. The roof is 11mm high, it may need to be scaled in Z to fill the gap accurately.
Statistics
Likes
0
Downloads
0