Dremel collet holders
Description
DREMEL COLLET HOLDERS ===================== This is my first attempt at creating a 3D model to print, so I wanted to keep it simple and easy during the learning curve. FreeCAD FCStd files and STL files are included. LICENSE ======= Licensed under the WTFPL. http://www.wtfpl.net UnCopyright © 2023 Renegade Mind This work is free. You can redistribute it and/or modify it under the terms of the Do What The Fuck You Want To Public License, Version 2, as published by Sam Hocevar. See the COPYING file for more details. FILES ===== - COPYING.txt - Dremel collet holder - attempt 1.FCStd - Dremel collet holder - attempt 1.png - Dremel collet holder - attempt 1.stl - Dremel collet holder - attempt 2.FCStd - Dremel collet holder - attempt 2.png - Dremel collet holder - attempt 2.stl - Dremel collet holder - attempt 2a.jpg - Dremel collet holder - attempt 2b.jpg - Dremel collet holder - attempt 2c.jpg - Dremel collet holder - attempt 3 - Top.png - Dremel collet holder - attempt 3.FCStd - Dremel collet holder - attempt 3.png - Dremel collet holder - attempt 3.stl - Dremel collet holder - attempt 3a.jpg - Dremel collet holder - attempt 3b.jpg - Dremel collet holder - attempt 3c.png - Dremel collet holder - attempt 3d.jpg - Dremel collet holder.txt ATTEMPT 1 ========= A simple 10x10 grid to hold 10 sizes of collets. The holes turned out to be a bit too small (about 4.8mm), but will fit smaller collets. Most likely you should rotate this in your slicer then slice off however many holes that you don't want. ATTEMPT 2 ========= A 10x6 grid to hold 10 sizes of collets. It includes 3 holes for collet caps. Holes in v2 are slightly larger and easily fit 4.8mm or 5mm collet shanks. ATTEMPT 3 ========= I wasn't happy with 1 or 2, so attempt 3 is a 10x6 grid to hold 10 sizes of collets. It includes 3 holes for collet caps. It has text pockets that can be filled in with crayon, however they're a bit small. Also in v3 I put holes in the spacers so it could actually hold 45 more collets. This was in part just an experiment, but also to save on filament. ISSUES ====== This is simply a holder, and not a case. It would be much better if it had a lid as the collets are a bit loose. However, you can simply wrap it in clear plastic cling wrap if you're just dumping it in a toolbox or if it will get moved around.
Statistics
Likes
0
Downloads
0