Fuselage For Foam Board plane
Description
I'm really into building these foam "gliders" in my spare time and I Wanted to get a stronger fuselage for the plane because it always breaks. But I Still want to keep the original wings, rudder, and elevator. So this is just the fuselage. Print these vertically unless you want ugly parts. Cut your foam wings out just a little under 5 inches in width. Then Cut you elevator out just under 3 3/4 inches. Then your rudder at just under 3 3/4. I designed it weird I'm sorry but just cut it shorter. The hole in the nose of the craft is for nose weight (PENNIES ONLY). Print these WITH A BRIM because you are standing them upright. For added fun you can cut out control surfaces and modify them before throwing to make it do loops and rolls. When connecting control surfaces to plane use hot glue as that will hold it in good. It's in 3 parts so its able to be printed. The Foam Plane Fuselage (1) is a extension of the fuselage PRINT THAT. If there are any questions please comment and lemme know what's up.
Statistics
Likes
0
Downloads
0