Tesla Model 3 Samsung T7 Shield case
Description
<p>This is a mount for installing a Samsung T7 Shield inside your glove box. It will keep it from sliding around. Its only held in by friction. I tried using double sided tape but it don't stick. It stays in place so no need to use tape anyways.</p> <p><B>Cars this will fit:</B> 2023 Tesla Model 3 SR. Not tested in any other year Model 3. It could fit but I have no idea.</p> <p><B>Parts needed:</B> 4x M3 12mm screws to attach the top to the bottom. </p> <p><B>Optional parts:</B> YONZEE Glove Box USB Hub and 0.5ft USB A to USB C cable.</p> <p><B>Install:</B> You just put the Samsung T7 Shield in the bottom part. Its a tight fit but it will get in there. You will use the 4x M3 screws to attach the top to the bottom part. Note, The screw holes are slightly under sized so you may need to use a knife to open the screw holes to get the screw started. M3 screw only need to be hand tight. Then put in your glove box on the side opposite of the USB port.</p> <p><B>Other notes:</B> You will want to print this in something that will work in a hot car. I used ABS for projects on my last car with no issues on very hot days. </p>
Statistics
Likes
0
Downloads
0