Direct Drive Filament Spool Holder
Description
I designed this direct drive spool holder to work with my [Ender 3 Micro Swiss DD Drag Chain / Cable Chain Mounts](https://www.thingiverse.com/thing:5863774), so that there is clearance when the print head is at its max 250 height. But it should work with any printer with T slot extrusions. I'm also using a [Triangle Lab filament run out sensor switch](https://www.trianglelab.net/products/sensors?VariantsId=10607). But there is also STL included with out the mounting point for the sensor. Note that the spool holder spindle and nut are reverse threaded so the filament pulls in the direction the nut would tighten. Other Parts Required: - 4 x [608RS Skateboard Bearings](https://www.amazon.com/gp/product/B07C6FL8TW) - 2 x [M8 Lock Nuts](https://www.amazon.com/gp/product/B075ZZY166) - 2 x M8 Nuts - 2 x [M8-1.25 x 80mm Socket Head Cap Screws](https://www.amazon.com/gp/product/B082W37TG7) - 2 x M5 x 20mm - 2 x M5 T Nuts - 1 x [Triangle Lab filament run out sensor switch (Optional)](https://www.trianglelab.net/products/sensors?VariantsId=10607)
Statistics
Likes
0
Downloads
1