Cleaning Scraper
Description
Cleaning Scraper Blade Size: 100x18mm Scraper Size: 110mm wide, 150mm long All parts except for the blade are printed using PETG. After inserting the blade, slide in the cover, pinch the cover and base, align the holes, insert both limiters into the bottom, and lock the blade and entire scraper in place. Install the mask with the text facing up. I recommend printing with PETG at a layer height of 0.1mm and 50% infill. The limiters and mask should be laid flat, and note that there is a flat surface for them to rest on. No supports are needed.
Statistics
Likes
0
Downloads
0