iFlight Chimera7 V2 Dragon Edition Guards and Bumpers
Description
Work in Progress** Tested** *Update - May.13.23 - Version 6 Fixed Guards Holes Glitches and added 9gram of support. Added Claws on the prop guard for the dragon version. Version 6 - Fixed many glitches on the guards and on some of the holes. also added more supports that adds 9 grams on each prop guards, 59 Grams on total on each. Version 5.3 - added Hole on Prop guards to be lighter. I rebuilt the Prop Guards From Scratch in version 5. Version 5.2 - Fixed model glitches on slicer - Added Orientation arrow on Prop Guards. Fixed Prop Guards Having issues With the Motors touching the inner rings. Reduced Prop Guard Weight and made it stiffer in Version 5. added Camera Lens Cover. Fixed the Honeycomb Wall hook to fit the Front Bumper hole better. Print Settings and details used on my prints For my Elegoo Neptune 3 Pro on Ultimaker Cura: PETG at Layer 1 to 4 (Pause at Height *Post Processing Setting* at layer 4) Change filament (Rest of the print in TPU 95A) Flow at 105% Bed 90dgrs at first Layer then leave it at 80dgrs Nozzle (0.4mm) (height 0.2mm) at 230dgrs at first layer then 225dgrs Infill at 40% in Cocentric Pattern Retraction 3mm - slow (15mm/s) Speed 20mm/s at first layer then 30mm/s the rest of the print Added glue stick on bed before each prints No raft or brim , only skirt Support, needed for the Props guards Motor Section Motor ring on the prop guards was design for the Xing2 2809 (can fit smaller or equal) Front, Back Guards and The Feets Use Zigzag support pattern print the Feets with TPU only Honeycomb wall Hook printed in PLA+ (205drgs - 100% flow - speed 60mm/s - Height 0.2mm) Shoulder Pads & Lens cover Printed in PETG (230dgrs - 100% flow - speed 50mm/s - Height 0.2mm) No Dragon edition can be found Here >> https://www.printables.com/model/465552-7-75-inch-fpv-drone-prop-guards-and-bumpers
Statistics
Likes
0
Downloads
0