Nerf Stampede gear extended
Description
This is a normal Stampede gear (the one directly linked to the plunger-tube), but it has one more tooth on the outer ring, so that the plunger-tube is pushed forward slightly further. I designed this gear so that my Full-length-darts Brass Breech would work properly. The full-length brass-breech was always a problem for the Stampede since the working tolerances are extremely low, if you want to reliably chamber a dart and want the tubes to connect more or less air tight. This gear is supposed to solve this problem, by pushing the plunger tube further forward, thus enabling the brass tubes to connect properly
Statistics
Likes
0
Downloads
0