Kobra PRIZM Fan Duct
Description
I made this PRIZM fan duct for the powerfull blowing of the printing model. It uses two 5015T 24V fans. I use fans from "Usongshine" brand. This fans begin work normally in low blowing mode from 70% and till maximum at 100%. May be other fan brends and models will work in a different way. To use this PRIZM fan duct you need to remove the default head cover and default fan. Then you need to wire the new fans to the used fan power port. You also need two screws to fix fans to the PRIZM fan duct. And you need two another screws to fix PRIZM fan duct to the head. I printed this model with PLA and in my case it fits to print other models with PLA plastic. I tested it only with PLA. An it works great for me. If you use another type of plastic (high temperature) then it is better to print the PRIZM fan duct with ABS for example. Because of the PLA may be melting.
Statistics
Likes
0
Downloads
0