VRS Brake Pedal Plate (With Stopper)
Description
I've designed a brake pedal plate with a stopper on the left side so you can't slide with your foot half way out of the pedal plate... like i did always. The pedal plate is 120mm long (high) and 105mm wide, the stopper on the left side is 5mm thick, so the useable width of the pedal plate is 100mm. The front of the plate has the same radius as the original one. The rear is flat but i've integrated some cutouts for the pedal arm with the right radius. The first version of the plate was just a big one without a stopper... i've included that too, maybe someone doesn't want a stopper, but a larger brake pedal. The plate is very rigid if printed with 3 walls and 5 bottom and 5 top layers and an infill of 25% @ 0.2mm layer height. You should place 1-2 5mm flat repair washers between the pedal plate and the mounting bracket on the pedal arm to make shure the plate is'nt bend too much.
Statistics
Likes
0
Downloads
0