Modular Storage-System for Ikea Skadis
Description
Started to make a Storage System made for Ikea Skadis which provides the following: - modular and stackable system (easy to connect and easy to seperate) - space saving system (use as much space from the skadis wall) - pretty easy to print (no supports needed for any parts - at least for the current modules) - little use of fillament while still stable - easy to add more modules ( there are many possibilities, will keep adding new stuff) - "skadis hooks" printed and clipped on separately (often had issues with integrated ones) All parts you can download yet are tested and work fine. I've printed all with 0.2mm layer hight, 30% infill and no supports. Take a look at the slicer pictures too. **To connect two modules simply press them together. To seperate them, gently squish the longer wall of one module to the inner side and then pull them appart. (You wont be able to seperate them by just pulling)** **Hooks are pressed into the holder contour of the module with an 90° angle and then rotated to correct direction. Make sure, you press them all the way in before rotating.** As already mentioned i will keep adding new modules and different sizes of the existing modules.
Statistics
Likes
0
Downloads
0