Gimbal Stick End M3
Description
Gimbal Stick End for M3 fitting 7 min print with recommended Cura settings for PLA. Printable with a 0.4 mm nozzle. Use a brim of about 5-10 lines thick. 20mm height 8mm width
Statistics
Likes
0
Downloads
0
Gimbal Stick End for M3 fitting 7 min print with recommended Cura settings for PLA. Printable with a 0.4 mm nozzle. Use a brim of about 5-10 lines thick. 20mm height 8mm width
Likes
0
Downloads
0