Zimaboard Case for QNAP 4x2.5g PCIE card
Description
As the title says, it's for a Zimaboard with a 4x2.5g pcie card. To use it, remove the clear cover from the bottom of the Zimaboard and re-use the 4 screws to mount it in the case. The cover of the case requires 4x 10mm m3 screws. For the ethernet card, you'll need to source some m2.5 screws. There is a bit of extra space so other PCIe cards should fit too as long as they are not longer than the zimaboard. There is a spot the mount a 40mm fan grill. Again, you'll need to source your own screws. When printing, you don't need supports.
Statistics
Likes
0
Downloads
0