Holley Digital Dash Screen Bezel and Mount
Description
I needed a way to mount the 7" Holley digital dash screen to my Cobra. I had been using the 3.5" handheld screen mounted to a Ram ball mount, so I reused that bolt pattern for the screen bezel and the dash mount. The baseplate has multiple holes patterned such that I can adjust it side to side on the dashboard. It goes together with 10-32 screws and nuts, except for the screen itself which is 8-32. The baseplate is not really printable the way it's modeled. I printed it upside down, and dropped about 1mm below the print surface so there is a flat way to start. You may have better luck in a different orientation but it worked for me. I did not use any supports.
Statistics
Likes
0
Downloads
0