Sun Desk Lamp
Description
Hey! This is my Sun Desk Lamp. I used actual NASA data to make this. You will need a lamp socket, and a bulb. I like to use a Multi color LED. These part will only work with this Lamp Socket from Amazon. (it has an EU Plug) EU Plug: https://www.amazon.de/dp/B09HX4GZKK?psc=1&linkCode=ll1&tag=ri0m0-21&linkId=587219b8eea2b6a5833f0f82f18433bc&language=de_DE&ref_=as_li_ss_tl Bulb: https://www.amazon.de/Kolbenform-dimmbarkeit-Farbsteuerung-Fernbedienung-Warmwei%C3%9F/dp/B07CNMGXGP?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=osram+led+mehrfarbig+e27&qid=1684505912&sr=8-4&linkCode=ll1&tag=ri0m0-21&linkId=07abaf8ee1dddbd81da2bca540915fc3&language=de_DE&ref_=as_li_ss_tl Print Settings: You only need to print the numbered files. Sun: Use a 0.4 mm Nozzle! or a line height of 0.2 mm and a width of 0.4 mm. Domes are quite hard to print. I always slow down the layers at the top to 50% print speed (at layer 670). Use 100% infill with concentric infill, or set your wall count to something ridiculous like 40. Any Basic white PLA will do the job just fine. I used Sunlu White PLA+ if that helps. Don't try Matte or glitter stuff, it will not work. No supports! Holder: Print with supports. That's it. Enjoy your Lamp. :D If you made one, please consider Buying me a coffee at https://www.buymeacoffee.com/Ri0m0 I'm a poor student in need of filament. I also have other lamps on my Profile (or they are coming soon!) check them out. Don't be afraid to ask if something doesn't work, or you have suggestions. Please note, this is provided as a non-commercial license.
Statistics
Likes
0
Downloads
0