Gong Allvator V2 mount for Flipsky 65161 with cooling and foot protection
Description
The Gong mount from carvalhoemmanuel is really smart with a screw on nose cone that hides the metal screws holding all together. Awesome design. This is a remixed version with a watercooling pass through the nose cone and into the main clamp mount. Works great with this water pump: https://opencircuit.se/product/12v-180l-h-water-pump-with-bracket This pump has an entry and exit that is 7-8 mm. The pipe bend on the mast mount is 8.5 mm. To work with both these you may use a soft silicone tube that is 6 mm inner dia. No need to seal the tubing or pipe bend at the bottom as in worst case it will leak in water while pumping water :) I also added a propeller guard that fits the Flipsky propeller named "173 mm". The diameter of the propeller is more like 184 mm, so this guard inner diameter is 188 mm. You can choose to use the propeller guard with or without additional 180 mm computer fan grills (one or two) that are mounted with thin cable ties. You may swap between this and the Motor Stabilizer as the height to the wing mount is the same for these two parts. All printed with PETG 100% infill. No additional reinforcement needed. These parts are used in this project: https://foil.zone/t/rifle-case-efoil-build-with-4-x-60v-powerworks-tool-batteries/18221/17 Extra parts needed: 4 x ISO 4762 / DIN 912 A2-70 M5x130: https://www.birkhofer-shop.com/epages/BirkhoferVerbindungselemente.mobile/secb89d2c1a4e/?ObjectPath=/Shops/BirkhoferVerbindungselemente/Products/04762.1.200.050.1300 2 x MF6S M5x10 A4 Syrafast ISO 10642 / DIN 7991 Allen key 6 x M4x20 allen key A4 2 x 180 mm fan grill: https://www.aquatuning.se/luftkylning/flaektgaller/10317/flaektgaller-till-axialflaektar-till-180mm-krom 8 x cable ties for front grill 8 x cable ties for back grill When cutting off the screw mounts for the fan grill, you need to add some paint to the edges or it will rust, even in fresh water.
Statistics
Likes
0
Downloads
0