BL-TOUCH Firmware & Armor
Description
FULL DISCLOSURE: I did not design the BL-TOUCH Armor or the Aquila C2 Mount. I posted these two models to go with my customized firmware on a v4.2.7 mainboard on either a Aquila C2 or on an Ender 3 Pro. I found this on UGH, can not believe I am going to say this, printables.com. I have printed this for my custom built 235x235x275mm Ender 3 Pro Clone. I did use my old Aquila C2 Print Head Carriage for this machine, so I found this mount for it on the same site. There is firmware that has been customized and tested for over a year now, and the firmware works great. It also has a z offset wizard in the firmware. I have trusted this firmware so much that I reset it so the probe is the z limit switch when homing. I also installed solid posts to take the place of the bed leveling springs, and I also run a 9 point level before every print. Here is the link to the firmware: https://github.com/The-300lb-Gorilla/BL-Touch-v427-Board There is also a firmware .zip file in the files section, either one will work. If you have issues with the nozzle to probe offset, or the X & Y Min Offset, let me know and I can compile a updated version for you. I am not perfect, so feel free to ask for an adjusted firmware package. If you want the source-code, let me know, and I will upload it to my spare google drive and send you a link to it. I have put the Custom START and END G-CODE in the sections below titled CURA 5.3 Start G-CODE & CURA 5.3 End G-CODE. Just copy and Paste from this listing to the Start and End G-CODE section under machine management in CURA 5.3 BL-TOUCH Aquila C2 Mount was Designed by: jacob laviolette (If you have an Ender 3 Pro, the BL-TOUCH Kit comes with a mounting bracket) If you want to use the original file, here is the link: https://www.printables.com/model/315930-voxelab-aquila-bl-touch-mount I have included a copy of the PDF page from the designer's page on this part. BL-TOUCH Armor was Designed by: Michael Hathaway If you want to use the original file, here is the link: https://www.printables.com/model/139874-bltouch-bl-armor I have included a copy of the PDF page from the designer's page on this part.
Statistics
Likes
0
Downloads
0