Modular magnetic cable organiser
Description
Simple modular organiser to keep your cables tidy. Can be customised to hold any number of cables just by adding more dock pieces. Mounts come in two sizes (small = 3.2 mm, big = 5.5 mm) to suit a variety of cables. The larger size is easier to assemble and will still hold any cable however. Parts to print: - Dock pieces - 1x left + 1x right + as many center pieces as you need - Cable mount - 1x bottom piece + 1x top piece Parts needed: - Magnets - 4x magnets (6 x 3 mm) per cable - Super glue - to stick the magnets in place - Double-sided tape - to stick the dock down Notes: - The dock pieces are intentionally designed with tight tolerances to keep them together. They should snap together with a satisfying click - The magnet holes are not designed to be press fit, but this may work depending on your print tolerance - Double check your magnet polarity before you stick them down! If you get this wrong, you can use a small flat head screwdriver in the slopes adjacent to the magnet holes to pry them back out Requests: - Feel free to request designs for different magnet sizes or cable thicknesses. I used 6 x 3 mm magnets because I had plenty of spares from other projects Changes from previous designs: - Dock is now modular pieces so the number of slots can be customised - Cable mount is now a threaded design and has knurling for easier assembly and disassembly
Statistics
Likes
0
Downloads
1