Air Valve with 9G / SG90 Servo (40mm and 1inch Version)
Description
Print should be a good slip fit on pipe, tested only with 40mm OD pipe. Metric 40mm Version: ID is 40.2mm, OD 44.3 (Metric) Imperial 1 Inch Version: ID is 25.65mm, OD 29.65mm Servo attached to valve with a slight interference fit, easily pressed on by hand or glued in place with a drop of flexible adhesive. Drill a small hole in the servo mount to secure it with a screw
Statistics
Likes
0
Downloads
0