KuPlane-3
Description
-This is 700mm wingspan airplane. -There are 2 options for wing: 3d printed and foam one. I cutted it from foam using hotwire (you can find templates in pdf file named "Clark_Y_140mm.pdf"). If you want to 3d print the wing you should use 3% infill in main wing and 5-7% in flaperons. --Canopy, motor mount and wing locks require M3 nuts and screws -To attach fuselage parts together you can use short Barbecue Sticks -V-tail is cutted out from 5mm foam(template in pdf file "Tail.pdf") -Elevator servo mount is cutted from foam -Electronics: SunnySky 1806S motor 3x SG90 servos Any 20 A ESC 1000 mAh 3s li-po
Statistics
Likes
0
Downloads
0