Nut for filament tube fitting
Description
This is the nut for the filament tube fitting. The screw type is PT1/8-28. Sometimes there are fittings labeled "M10". It can be used when making your own dry box for filament. Just drill a 10mm diameter hole in the dry box and fix the fitting with this nut. You can also use a washer for M10 if the hole is a little bigger. [print conditions] -printing type: FDM -printer: Original Prusa i3 MKS -filament: PETG -support: no -brim: no -raft: doesn't matter -infill: 20% -shell: 10 --- This is recommended to ensure strength -nozzle diameter: 0.4mm -layer height: 0.2mm -print directions: Please refer to the photo.
Statistics
Likes
0
Downloads
0