Zelda Pot Playset parametric magnet holes
Description
Thanks to ClassyGoat for designing this awesome playset. Sadly i didn't have the right magnets and am nowhere near the us, so i remixed the project to fit 6x2mm magnets and while i was at it i made the holes parametric so that you can make the set fit the magnets you already have, just change the values for the hole diameter(hole_diam) and the hole depth (hole_depth) in the spreadsheet files. hole depth has to be double the value you want for technical reasons. Don't forget to add tolerances. 0.5mm for the diameter and 0.2 before doubling for the depth worked well for me. I only modified the already existing holes so there are limits to how big you can make the holes. Watch for parts of the holes piercing through when increasing the size. I couldn't avoid some piercing through, it is minimal and won't be visible after painting, so i didn't bother to edit the mesh. Be warned. As of now i have not finished printing everything and testing it for fit. (Most of the parts are already finished and do fit reasonably well though.) Thusly the part is still work in progress.
Statistics
Likes
0
Downloads
0