Maker Rack
Description
Maker Rack ==================== This is a work in progress --------------------- This rack is meant to hold trays at a slight angle to allow you to remove the trays you need easily and allow you to see everything at a glance. Hopefully, they work well in maker labs or even in a workspace with limited space. > This has not been printed or tested yet so print at your own risk! ------------------------------ Instructions: --------------------- To build this you will need: - (1) Base - (4) Rack - (8) Trays After printing the necessary parts you should be able to slide the racks into each section in the base and secure them with super glue. The trays are then just set into the groves on each rack. You could glue them on if you wanted however it would kinda defeat the purpose of the rack.
Statistics
Likes
0
Downloads
0