iRobot Braava M6 Mop attachment for previous Gen pads
Description
<b>Backstory</b> I have owned a Braava 380 for years. Each time I used it our grumpy old Yorkie would try to attack it but never succeeded until recently. I just tried to use our Braava 360 a few days ago to find that my wheels were pulled off by our dog during its last use. Yesterday we picked up a Braava M6 Jet only to find we were going to have to replace all of our reusable mopping pads. I spent a bit of time designing this adapter but I think <b>it still needs some work</b>. <b>Explanation</b> In its current design, two prints are needed. The M6 attachment plate and the 380 style base. These two pieces align and connect with three triangles. I planned to glue them with CA glue but they fit so tight, I haven't needed to. The print-in-place hinged pad plate requires two pieces of Velcro to hold the pads in place. You can hinge the flaps down to attach your pad. <b>Braava M6 A V2.stl</b> 10hrs 27min 28.79m 85.9g <b>Braava M6 B V2.stl</b> 2hrs 11min 5.73m 17.1g <b>Update</b> The next iteration of this will have more clearance between the pad mount and the Braava M6 body as well as recessed Velcro pockets. For my purposes, I just hinge the flaps down while attaching the adapter to the Braava M6 <b>Credit</b> I would like to give credit for the design of the M6 mounting plate was not designed by me. This integral parts was found here and gave me a starting point for my design. <a href="www.thingiverse.com/thing:4331282">iRobot Braava Jet M6 original pads by Gabry1609</a>
Statistics
Likes
0
Downloads
0