Gigabyte GTX1650 SFF Fan Shroud
Description
The stock fan shroud on my Gigabyte GTX1650 SFF card melted when the fans locked up. Finding replacements for those fans proved challenging, so I designed this to accept standard 5010/5012/5015 fans. The stock fans are 3-pin, which is necessary if you wish to be able to monitor fan RPMs. As an example, I bought 2 of these and they work just fine wired in parallel: https://www.amazon.com/gp/product/B0161ZXJ64/ You'll reuse the 6x screws to hold the shroud to the heatsink, but will need at least 4x M4x20 with a number of M4 washers to hold the fans to the shroud. Use the washers to prevent the M4 bolts from sinking too deep in the printed shroud.
Statistics
Likes
0
Downloads
0