TAZ 5 1.75mm Conversion Using e3d v6
Description
1.75mm extruder conversion for LulzBot Taz 5 using generic e3dv6 hotend parts. You will need the following to assemble the hotend * A generic e3d v6 hotend. Clones are available online for around $20, but make sure to get one with a 24v heater cartridge * Two M3x20 bolts, two M3x10 bolts, and four M3 nuts (for DaVinci2000's part cooler shroud) * A 5015 "squirrel cage" blower fan (for the part cooler) * Some short wires, about 22AWG * Pin headers * a 4-pin header for the stepper, a 2-pin header for the part cooler fan, and a 2x8 header for the TAZ hotend connector - I used two smaller headers side-by-side, a 2x3 for the thermistor and a 2x5 for everything else * The old hotend/extruder from your TAZ 5 * A generic bowden extruder * Some bowden tube (58mm long)
Statistics
Likes
0
Downloads
1