Parkside PWM A1 Anemometer tripod adapter and holder
Description
The anemometer has no surface to stand on, so I designed a holder to put it in. it can also be mounted on a tripod, if you get one of those adapter screws( [amazon link](https://www.amazon.de/ZoeTekway-Gewindeadapter-Zollschrauben-Mikrofon-Kugelkopf/dp/B0B5LB8YLB/) ) and put it in from the inside. I used a heatgun to soften the plastic before screwing it in. To fix the bar you'll need two countersunk m3x10mm screws. The fit was a bit on the thight side, maybe do a test print and see if you have to adapt horizontal expansion or flow values.
Statistics
Likes
0
Downloads
0