Camera Spacer for Runcam Phoenix SE2 + Usmile 220mm/5" Freestyle FPV Drone Frame Kit
Description
This is a spacer for mounting a RunCam Phoenix SE2 into the provided camera plates for the Usmile 220mm/5" Freestyle FPV Drone frame kit. I found that the gap between the plates when affixed to the frame is 22mm, while the mounting axis of the Phoenix SE2 is about 19.4mm. I created this U-shaped spacer to wrap around the back of the camera for stability and to fill the gap on either side. Recommended to print out of ABS for shock resistance, but PLA should be fine.
Statistics
Likes
0
Downloads
0